Home > SHOOTING GEAR > AR15 Parts
Sort By:
Page of 2
TRINITY FORCE CW308 AR10 .308/7.62x51 3 PACK 5/8x24 THREAD MUZZLE BRAKE CRUSH WASHER TRINITY FORCE CW223 AR15 3 PACK 1/2x28 THREAD MUZZLE BRAKE CRUSH WASHER NCSTAR AARCW AR15/M4 Muzzle Crush Washers - 3 pack
NCSTAR AARCW AR15/M4 Muzzle Crush Washers - 3 pack
Our Price: $6.75
Sale Price: $6.25
Savings: $0.50
The Trinity Force crush washer can be used to secure any .308/7.62x51 muzzle break/compensator. It is intended for one-time use only. Do not re-use this crush washer for multiple muzzle device installations.

  • Weight (oz) 0.11
  • Width (in) 0.75
  • Length (in) 0.75
  • Material - Aircraft Grade Aluminum
  • Coating Type - Hard Coat Anodized Finish
  • Color - Black
The Trinity Force crush washer can be used to secure any .223/5.56mm muzzle break/compensator. It is intended for one-time use only. Do not re-use this crush washer for multiple muzzle device installations.

  • Weight (oz) 0.11
  • Width (in) 0.75
  • Length (in) 0.75
  • Material - Aircraft Grade Aluminum
  • Coating Type - Hard Coat Anodized Finish
  • Color - Black

Fits a wide variety of gun makes & models. When in doubt please use "ask a question" button to find out if this will fit your gun.

Local Pickup Available either at our LOS ANGELES, CA or PENSACOLA, FL locations. Please inquiry about availability and premium price discounts prior to ordering.
• AR15/M4 Flash Hider and Muzzle Brake Crush Washers - 3 pack. Includes 3 each Crush Washers in the packaging.
• This allows you to properly time your muzzle brakes and flash hiders on your barrel, so that the ports are facing the correct directions for optimum performance.
• Steel Construction with Black finish
• Outside Diameter: 0.75"
• Inside Diameter: 0.50"
• Individual Weight: 0.1 oz.
TRINITY FORCE WBG01H AR DMR PISTOL GRIP w/STORAGE URBAN GRAY TRINITY FORCE WBG01S AR DMR PISTOL GRIP w/STORAGE SAND/TAN/FDE AR15 J1126 MIL SPEC RUBBER PISTOL GRIP GROOVE w/STORAGE
TRINITY FORCE WBG01H AR DMR PISTOL GRIP w/STORAGE URBAN GRAY
List Price: $19.99
Our Price: $14.99
Sale Price: $8.99
Savings: $11.00
TRINITY FORCE WBG01S AR DMR PISTOL GRIP w/STORAGE SAND/TAN/FDE
List Price: $19.99
Our Price: $14.99
Sale Price: $8.99
Savings: $11.00
NCSTAR AR15 J1126 MIL SPEC RUBBER PISTOL GRIP GROOVE w/STORAGE
Our Price: $9.95
Sale Price: $9.39
Savings: $0.56

AR DMR Grip w/Storage (Grey)

The AR DMR Pistol Grip with Storage Compartment mounts onto AR-15/ M4/ M16 lower receivers and uses standard Pistol Grip bolt/screw from LPK. It has an ergonomic design to fit comfortably in the hand. It features finger grooves, thumb rest, grip texture, and back-strap extension. The storage compartment can store two CR123A batteries, spare parts, or emergency survival supplies.

– Oversized Palm Swell and finger grooves for improved weapon leverage
– Direct Replacement for AR-15/M4 pistol grip
– One-piece reinforced polymer construction
– Beavertail backstrap for improved ergonomics

SKU: WBG01H
Weight (oz)

3.3

Width (in)

4.4

Length (in)

3.2

Material

Reinforced Polymer

Color

Grey

AR DMR Grip w/Storage (Sand)

The AR DMR Pistol Grip with Storage Compartment mounts onto AR-15/ M4/ M16 lower receivers and uses standard Pistol Grip bolt/screw from LPK. It has an ergonomic design to fit comfortably in the hand. It features finger grooves, thumb rest, grip texture, and back-strap extension. The storage compartment can store two CR123A batteries, spare parts, or emergency survival supplies.

– Oversized Palm Swell and finger grooves for improved weapon leverage
– Direct Replacement for AR-15/M4 pistol grip
– One-piece reinforced polymer construction
– Beavertail backstrap for improved ergonomics

SKU: WBG01S Category:
Weight (oz)

3.6

Width (in)

3.16

Length (in)

4.37

Material

Reinforced Polymer

Color

Sand

This specially designed rubber pistol grip with finger grooves and storage compartment provides superb comfort and is a must have for any shooting situation. The non slip surface allows the shooter to maintain grip even when raining, sweating or worst case scenario bleeding. Heavy duty polymer so it will take a beating and still last for years. Mounts using your existing grip mounting screws.

Specifications:

  • Easy to install pistol grip mounts to most mil-spec type rifles
  • Rubber molded design provides maximum comfort and control
  • Storage compartment in the bottom of the grip
  • Constructed of heavy duty polymer and rubber
  • Mounting screw not included
  • Made in USA
TRINITY FORCE AR15 & AR10 OVERSIZED EXTENDED CHARGING HANDLE LATCH AR15 ENHANCED EXTENDED BOLT CATCH RELEASE TRINITY FORCE SS911 AR15 SAFETY SELECTOR SWITCH BLACK
TRINITY FORCE AR15 & AR10 OVERSIZED EXTENDED CHARGING HANDLE LATCH
List Price: $19.99
Our Price: $12.99
Sale Price: $9.99
Savings: $10.00
TRINITY FORCE BCR913 AR15 ENHANCED EXTENDED BOLT CATCH RELEASE
List Price: $12.00
Our Price: $9.99
Savings: $2.01
TRINITY FORCE SS911 AR15 SAFETY SELECTOR SWITCH BLACK
List Price: $12.00
Our Price: $9.99
Savings: $2.01
Oversized for quick access from all shooting positions. Allows quick, easy operation with left hand. Makes the charging handle easier to find and operate, especially on scope-mounted flat top receivers. Great for three gun shooters; expedites reloads and immediate action drills. Works on all of America's favorite rifles, (.223 & 5.56 and the 7.62x39 & 7.62x51 variants). Easy, no-gunsmithing installation.


Works on all AR-15/M16-type rifles including the AR-10 and SR-25.


SPECIFICATIONS

• Weight .6 oz
• Material - Steel
• Finish - Black Anodized
This Enhanced Extended Bolt Catch is the perfect replacement for your AR15. It's solid gun quality steel construction and clean matte black finish make it a great looking replacement, build project or spare part. Ready for any combat situation, shooting competition or just plinking on the range.

SPECIFICATIONS

  • Matte Black anodized finish
  • Precision machined from gun quality steel
  • Wide surface area bolt catch latch for enhanced operation
  • Sleek aggressively serrated design
  • Manufactured and coated in the U. S. to exact Military specifications
    This Safety Selector Switch is the perfect replacement for your AR15. It's solid gun quality steel construction and clean matte black finish make it a great looking replacement, build project or spare part. Ready for any combat situation, shooting competition or just plinking on the range.

    SPECIFICATIONS

  • Matte Black anodized finish
  • Precision machined from gun quality steel
  • Wide surface area bolt catch latch for enhanced operation
  • Two Position Selector Switch: Semi-Auto
  • Sleek aggressively serrated design
  • Manufactured and coated in the U. S. to exact Military specifications
  • NcStar VMFLPR PICATINNY 1" EXTENDED FLASHLIGHT MOUNT/STANDARD TRINITY FORCE MNTDB AR15 QD Quick Detach Receiver End Plate TRINITY FORCE MNTEP BLACK AR15 THREE POINT QD RECEIVER END PLATE / TACTICAL SLING MOUNT
    TRINITY FORCE MNTDB AR15 QD Quick Detach Receiver End Plate
    List Price: $17.99
    Our Price: $14.99
    Sale Price: $11.99
    Savings: $6.00
    TRINITY FORCE MNTEP BLACK AR15 THREE POINT QD RECEIVER END PLATE / TACTICAL SLING MOUNT
    List Price: $17.99
    Our Price: $14.99
    Sale Price: $11.99
    Savings: $6.00
    • Picatinny/ MIL-STD1913 1" Flashlight/ Laser Extended Ring Mount.
    • Low profile and light weight Ring Mount will accommodate any 1" Flashlight or 1" Laser.
    • Mounts onto Weaver/ Picatinny/ MIL-STD 1913 type rails.
    • The Ring Mount can Extend forward past the edge of a handguard for better ergonomics and free up valuable space on your handguard.
    • Black anodized aluminum construction
    • Length:
    • Weight: 1.7 oz.
    The Quick Detach AR Receiver End Plate is compatible with all
    standard dimension quick detach sling swivels. It features a lightweight
    aluminum construction and is anodized for finish matching and corrosion
    resistance. The end plate fits both Mil-Spec and commercial tubes.
    The Three-Point End Plate can be installed on any standard lower receiver and features ambidextrous sling clip loops as well as a QD socket in the center of the endplate for single point sling attachments. The endplate is fabricated from aircraft grade aluminum, and is designed to enhance lightweight builds.
    TRINITY FORCE WBG02B AR15 DI SLIM PISTOL GRIP w/ STORAGE AR15 A2 MIL-SPEC BIRDCAGE MUZZLE BRAKE / COMPENSATOR / FLASH HIDER Trinity Force MNHQ03B AR15 Trigger Guard Skeletonized Ultra Light
    Trinity Force MNHQ03B AR15 Trigger Guard Skeletonized Ultra Light
    List Price: $19.99
    Our Price: $15.00
    Sale Price: $12.00
    Savings: $7.99

    DI Enhanced Slim Grip w/Storage (Black)

    The DI Slim Pistol Grip is double injected for improved comfort and traction. Designed for the AR platform, this grip utilizes aggressive texturing and a balanced palm swell for pressure point mitigation and more positive contact when firing. "Sticky Grip" - defeats sweat, grime and grease for superior grip.

    – Direct Replacement for AR-15/M4 pistol-grip
    – One-piece reinforced polymer construction
    – Beavertail back strap for improved ergonomics

    Weight (oz)

    3.6

    Width (in)

    3.32

    Length (in)

    4.74

    Material

    High Density Polymer/Advanced Rubber

    Color

    Black

    Now offering straight off the product line, our newest AR15 A2 Birdcage Muzzle Brake / Compensator / Flash hider. Fits onto standard 1/2x28 threaded barrels. Perfectly ported to expel gases forward, upward and side ways. No more dirt and dust in the eyes when firing in the prone position. Steel construction makes for a solid, reliable item ready for any shooting situation.


    • AR15 A2 .223/5.56 Birdcage Muzzle Brake / Compensator
    • Screws onto standard ½" X 28 threaded barrels (with .223, 5.56 bore).
    • Has five slots that direct the exiting propellant gasses forwards, upwards and to both sides creating a hybrid to reduce muzzle rise and felt recoil making it easier and quicker to reacquire targets.
    • There are no open ports on the bottom, this will reduce the dust signature when firing prone.
    • Steel Construction with Black Finish

    Ultralight AR Trigger Guard

    The Trinity Force AR trigger guard features screw-in installation for ease of use and removal. The oversized profile allows for superior trigger manipulation when wearing shooting gloves or cold weather hand protection.

    For your safety, Trinity Force recommends this part be installed by a competent, qualified gunsmith/installer with an understanding of the weapon platform that the part is being installed on. Always make sure the firearm is unloaded and pointed in a safe direction when working.

    SKU: MNHQ03B
    Weight (oz)

    0.3

    Width (in)

    0.61

    Length (in)

    2.16

    Material

    Aircraft Grade Aluminum

    Coating Type

    Hard Coat Anodized Finish

    Color

    Black

    Trinity Force Free Float Quad Rail Handguard End Cap (24mm) TRINITY FORCE WBG02H AR15 DI SLIM PISTOL GRIP GRAY TRINITY FORCE WTBA03 AR15 OMEGA 2 A-FRAME 6 POSITION COLLAPSIBLE BUTT STOCK
    TRINITY FORCE WTBA03 AR15 OMEGA 2 A-FRAME 6 POSITION COLLAPSIBLE BUTT STOCK
    List Price: $24.99
    Our Price: $29.99
    Sale Price: $13.50
    Savings: $11.49

    The 24mm Quad Rail Handguard End Cap are designed to fit with the Trinity Force Free Float Quad Rail system along with many other brand Free Float Quad Rail systems. They can be screwed into the front face of the free float rail. There are two different end cap sizes to accommodate different barrel profiles, but this particular model is sized at 24mm. It is one of the many firearm devices that we are very pleased to carry. For an amazing way to equip yourself with the best suited equipment for all of your shooting requirements.

    • Weight (oz): 0.7
    • Length (in): 1.8
    • Width (in): 0.33
    • Coating Type: Hard Coat Anodized Finish
    • Material: Aircraft Grade Aluminum
    • Color: Black

    DI Slim Grip (Gray)

    The DI Slim Pistol Grip is double injected for improved comfort and traction. Designed for America's favorite platform, this grip provides a slightly reduced grip angle for improved weapon leverage in close to long range applications, and a more positive contact when firing. This grip is designed to be used with rifles that feature a medium-to-extended length of pull.

    – Direct replacement pistol-grip
    – One-piece reinforced polymer construction
    – Beavertail backstrap for improved ergonomics

    Weight (oz)

    3.6

    Width (in)

    3.16

    Length (in)

    4.37

    Material

    High Density Polymer/Rubber

    Color

    Gray

    This Mil Spec OMEGA Gen 2 A-Frame 6 position collapsible butt stock by Trinity Force in the classic black finish is ready for action. Heavy duty polymer so it will take a beating and last for years. Mounts using your existing hardware, tubes, etc.

    Specifications:

    • Deluxe A-frame 6-position collapsible butt stock
    • Spring loaded lever makes length adjustment fast and easy
    • 4 ambidextrous points to mount QD sling swivel
    • Constructed of heavy duty polymer
    • Fits Mil Spec buffer tubes (not included)
    • Includes removable rubber butt pad which helps reduce felt recoil.
    • Comes with Trinity Force limited lifetime warranty.
    TRINITY FORCE TBA04H AR15 LAW ENFORCEMENT BUTT STOCK & PAD GRAY TRINITY FORCE TBA05H GREY OMEGA MIL SPEC BUTT STOCK TRINITY FORCE AR15 ENHANCED RIBBED AMBIDEXTROUS SAFETY SELECTOR SWITCH BLUE
    TRINITY FORCE TBA05H GREY OMEGA MIL SPEC BUTT STOCK
    List Price: $24.99
    Our Price: $19.99
    Sale Price: $17.00
    Savings: $7.99
    The L-E stock was designed to conform with design parameters for the standard LE style stock found on most Law Enforcement and stock builds. This stock will fit with a Mil-Spec buffer tube and features a quick adjust grip lever and a multiple sling mount.

  • High Densty Polymer
  • Injected High Density Rubber
  • Steel Mounting Hardware
  • Aircraft Grade Aluminum
  • Rubber butt pad reduces felt recoil


  • Difference Between Mil-Spec and Commercial Buffer Tubes


    Fits a wide variety of gun makes & models. When in doubt please use "ask a question" button to find out if this will fit your gun.

    Local Pickup Available at our PENSACOLA, FL location. Please inquiry about availability and premium price discounts prior to ordering.

    Omega Stock (Grey)

    The Omega Stock features many design elements from a LE-style stock while incorporating a host of upgrades. The unlocking buffer tube lever allows for easy stock removal from the rifle, and the recoil pad aids in contact point traction as well as impact dispersion. The Omega stock is best used in applications where size constraints are not present and rifle weight balance is necessary.

    SPECIFICATIONS:

    Length (in)

    7.4

    Receiver Extension Type

    Mil-Spec

    Weight (oz)

    12.9

    Length of Pull Range (in)

    3.3

    Length of Pull Collapsed (in)

    12.2

    Length of Pull Extended (in)

    15.5

    Material

    High Strength Steel, High-Density Polymer/Rubber

    Color

    Grey

    ***Photos overexposed to show color.*** Item will be darker in nature and will have a dark navy blue tone. Almost appears to be black, but when installed against the black of the firearm and/or exposed to direct sunlight and/or other bright light conditions the blue tone becomes more apparent. There is no other part like this on the market and we are the first to get them from Trinity Force. They are so new that they are not even shown on their own website.

    This Enhanced
    Ambidextrous Safety Selector Switch is the perfect replacement for your favorite rifle. It's solid gun quality steel construction and clean matte blue finish make it a great looking replacement, build project or spare part. It can be installed on any standard lower receiver and will function when deployed on either the right or left side of the rifle. The right hand lever has been shortened to accommodate right-handed shooters. Quantities are limited so hurry and get yours today!

    SPECIFICATIONS

    • Matte Blue finish
    • Precision machined from gun quality steel
    • Two Position Selector Switch: Semi-Auto
    • Sleek ribbed design
    • Manufactured and coated in the U. S. to exact Military specifications
    TRINITY FORCE AR15 .223/5.56 BLACK DROPIN QUAD RAIL CARBINE LENGTH HANDGUARD SYSTEM 6.5" NCSTAR VALRKMQR KEYMOD QUICK RELEASE COMPACT RED LASER LOW PROFILE DESIGN NCSTAR VMDCHMFRQ AR15 ADVANCED DETACHABLE CARRY HANDLE/ QUICK RELEASE MOUNT/ FOLDING REAR SIGHT/ REFLEX OPTIC RAIL
    NCSTAR VALRKMQR KEYMOD QUICK RELEASE COMPACT RED LASER LOW PROFILE DESIGN
    List Price: $39.99
    Our Price: $49.99
    Sale Price: $24.99
    Savings: $15.00
    This Drop-In Carbine Quad Rail will fulfill the rail requirements for any SOPMOD or traditional style build and provides multiple Mil-Std 1913 rails for mounting weapon accessories. This rail can be used in conjunction with a MilSpec barrel nut and A2FSP. The two panels are secured with barrel nut tension and hex screws, providing a solid base for optics, lights, and vertical grips.

    SPECIFICATIONS:
    • Carbine Length Quad Rail to replace factory 6.5 inch Carbine Length handguards.
    • Carbine Length Quad Rail Hand Guard (Carbine Length Gas system), top rail is at receiver height and the quad rails are Picatinny/ MIL STD 1913 specs. Large ventilation holes.
    • Fits onto Carbine Length gas system using the GI Handguard Cap and Delta Ring. Works with the circular style handguard end caps. Not compatible with triangular style end caps.
    • The Solid Quad Rail allows for the attachment of: lights, lasers, designators, vertical grips, bipods and other accessories that can mount onto weaver/Picatinny/ MIL STD 1913 type rails.
    • Very easy to install with four Allen head screws and the provided mounting tool. No gunsmithing required, drop-in fit.
    • All Aluminum Construction. Black Anodized finish
    FEATURES:
    • KeyMod™ Quick Release Compact Red Laser, low profile design gets the laser closer to the bore of the firearm.
    • Featuring NcSTAR's US Patented Auto-Locking KeyMod™ Quick Release mount. Mounts directly to KeyMod™ slots with a flip of a lever, no tools required.
    • The Red Laser operates with a single multi-function button. Press and hold down the button for more than a second and the laser powers On. Tap the button to use the Strobe feature. Press and hold down the button to power the laser Off.
    • Fully adjustable for Elevation and windage.
    • Laser runs on two CR1/3N lithium batteries (included). Battery door locks in place, depress the center button and slide door a ¼" and lift door to access battery compartment.
    • Laser body constructed of polymer, and the KeyMod™ base is made from steel.
    • US Patent 9,341,441
    The VISM Gen. 2 Optic Mount Carrying Handle provides a short carrying handle as well as a compact red dot mounting base. This combination provides the user with a base with which a red dot can be co-witnessed and a carrying handle to transport the weapon system. With two QD levers, this mount can be detached with a moments notice to be attached to another platform while maintaining zero with the built in sight.

    Features:

    - Advanced Gen 2 Quick Release Carry Handle, Optics Rail Mount, and Back-Up Flip-Up Rear Aperture Iron Sight
    - Dual Locking Quick Release Mount that attaches to Picatinny rails
    - Rear of mount has an Optics rail for mounting a Reflex Optic. Specifically designed to work with VISM VDGRLB Reflex optic and Red Laser. It will also work with NcSTAR Micro Dot Reflex Optics.
    - With the VDGRLB there is a Laser Channel machined onto the Top of the Carry Handle.
    - In the front is an adjustable for windage Back-Up Flip-Up Rear Aperture Iron Sight set at the proper 1.5" sight height.
    - All Aluminum Construction. Black Anodized finish
    - US PATENT PENDING
    TRINITY FORCE AR15 CARBINE LENGTH KEYMOD FREE FLOAT HANDGUARD SYSTEM 7" NCSTAR VMARMLC AR15 M-LOK HANDGUARD/ TWO PIECE/ DROP IN FIT/ CARBINE HANDGUARD LENGTH/ 7.5"L NCSTAR VMARTMLC AR15 TRIANGLE M-LOK HANDGUARD/ TWO PIECE/ DROP IN FIT/ CARBINE HANDGUARD LENGTH
    NCSTAR VMARMLC AR15 M-LOK HANDGUARD/ TWO PIECE/ DROP IN FIT/ CARBINE HANDGUARD LENGTH/ 7.5"L
    List Price: $69.99
    Our Price: $59.99
    Sale Price: $39.99
    Savings: $30.00
    The Echo Rail is a free float rail solution for America's favorite rifle owners looking for a solid platform on a budget. The barrel nut locks up with the rail via six hex bolts and a set of timing shims (if applicable, not included) used during the installation process. The Echo rail retains its slim profile from its base to the muzzle end. Oversized cutouts along the top spine of the rail body help mitigate the weight penalty, while keeping the rifle sturdy under environmental stress.

    SPECIFICATIONS:
    • Fits direct impingement systems (not short stroke)
    • Outer Diameter 1.55"
    • Inner Diameter 1.28"
    • Aircraft Grade Aluminum / Steel Mounting Hardware
    • Black Anodized
    • Mounting Hardware / Allen Wrench / Extra Screw
    Ncstar VMARMLC M-LOK® Handguard for your rifle is a drop in combat ready carbine length handguard and fits carbine length gas systems. It's ready to take on all situations and able to handle all of your tactical accessories.

    • NEW M-LOK® Handguards for the .223/5.56 Platforms.
    • Easy Drop-In install, no special gunsmithing involved, fit into Delta Ring and front Handguard Cap. Remove factory handguard, drop in the M-LOK® handguards and use supplied screws to secure M-LOK® handguard in place.
    • Solid fit, top rail is at receiver height and extends over Delta ring to the edge of the receiver. Handguard has 7 angle surfaces of M-LOK® slots.
    • Black Anodized Aluminum Construction
    • This model fits: Carbine Length Gas Systems
    • Includes two Accessory M-LOK® to Picatinny Rail Sections. One Short (1½ M-LOK® slots/ 5 slot Picatinny) and one Medium Length (2½ M-LOK® slots/ 9 slot Picatinny) Picatinny Rail sections. They can be placed in any of the 7 angled M-LOK® surfaces.
    • Designed to fit with: MIL-SPEC Barrel Nut, Delta Ring, and front Handguard Cap.
    • Length: 7.5"
    • Weight: 5.9 oz. / 8.0 oz. with both accessory rails attached
    • US PATENT PENDING
    This Ncstar VMARTMLC AR15 Triangle M-LOK Handguard Fits Carbine Length Gas Systems. This replaces standard Carbine and M4 Length hand guards.


    • Easy Drop-In install, no special gunsmithing involved, fit into Delta Ring and front Handguard Cap. Remove factory handguard, drop in the M-LOK® handguards and use supplied four screws to secure M-LOK® handguard in place. US Patent Pending
    • This model fits: Carbine Length Gas Systems. This replaces standard Carbine and M4 Length handguards.
    • Solid fit, top rail is at receiver height and you have M-LOK® slots along each sides and the bottom of the handguard.
    • Includes two Accessory M-LOK® to Picatinny Rail Sections. One Short (5 slot Picatinny) and one Medium (9 slot Picatinny) Length Picatinny Rail sections. They can be placed in any of the sides or bottom M-LOK® slots.
    • Black Anodized Aluminum Construction
    • Handguard surface overall Length is 8.75". The Handguard extends past the front handguard cap and front sight post, to give you more surface area to place your hand and accessories.
    • US PATENT PENDING
    NCSTAR VMARKMM AR15 KEYMOD HANDGUARD/ TWO PIECE/ DROP IN FIT/ MID-LENGTH HANDGUARD LENGTH/ 8.5"L NCSTAR VMARKMR AR15 KEYMOD HANDGUARD/ TWO PIECE/ DROP IN FIT/ RIFLE HANDGUARD LENGTH/ 12"L NCSTAR VMARMLM AR15 M-LOK HANDGUARD/ TWO PIECE/ DROP IN FIT/ MID-LENGTH HANDGUARD LENGTH/ 9.5"L
    • NEW Keymod Handguards for the AR15/M4 Platforms.
    • Easy Drop-In install, no special gunsmithing involved, fit into Delta Ring and front Handguard Cap. Remove factory handguard, drop in the KeyMod handguards and use supplied screws to secure KeyMod handguard in place.
    • Solid fit, top rail is at receiver height and you have 7 angles of KeyMod slots
    • Black Anodized Aluminum Construction
    • This model fits: Mid-Length Gas System
    • Includes two Accessory KeyMod to Picatinny Rail Sections. One Short and one Medium Length Picatinny Rail sections. They can be placed in any of the 7 angled KeyMod sections.
    • Designed to fit AR15/M4s with: MIL-SPEC Barrel Nut, Delta Ring, and front Handguard Cap.
    • Length: 8.5"
    • Weight: 7.3 oz. / 9.3 oz. with both accessory rails attached
    • US PATENT: D747426
    • NEW Keymod Handguards for the AR15/M4 Platforms.
    • Easy Drop-In install, no special gunsmithing involved, fit into Delta Ring and front Handguard Cap. Remove factory handguard, drop in the KeyMod handguards and use supplied screws to secure KeyMod handguard in place.
    • Solid fit, top rail is at receiver height and you have 7 angles of KeyMod slots
    • Black Anodized Aluminum Construction
    • This model fits: Rifle Length Gas Systems
    • Includes two Accessory KeyMod to Picatinny Rail Sections. One Short and one Medium Length Picatinny Rail sections. They can be placed in any of the 7 angled KeyMod sections.
    • Designed to fit AR15/M4s with: MIL-SPEC Barrel Nut, Delta Ring, and front Handguard Cap.
    • Length: 12.0"
    • Weight: 9.8 oz. / 11.8 oz. with both accessory rails attached
    • US PATENT: D747426
    • NEW M-LOK® Handguards for the AR15 Platforms.
    • Easy Drop-In install, no special gunsmithing involved, fit into Delta Ring and front Handguard Cap. Remove factory handguard, drop in the M-LOK® handguards and use supplied screws to secure M-LOK® handguard in place.
    • Solid fit, top rail is at receiver height and extends over Delta ring to the edge of the receiver. Handguard has 7 angle surfaces of M-LOK® slots.
    • Black Anodized Aluminum Construction
    • This model fits: Mid-Length Gas Systems
    • Includes two Accessory M-LOK® to Picatinny Rail Sections. One Short (1½ M-LOK® slots/ 5 slot Picatinny) and one Medium Length (2½ M-LOK® slots/ 9 slot Picatinny) Picatinny Rail sections. They can be placed in any of the 7 angled M-LOK® surfaces.
    • Designed to fit AR15s with: MIL-SPEC Barrel Nut, Delta Ring, and front Handguard Cap.
    • Length: 9.5"
    • Weight: 7.5 oz. / 9.6 oz. with both accessory rails attached
    • US PATENT: D779013